菜单
配件

其它

每页条目
1 - 20 / 97
Adapter C50C to 2 1/2 inch with O-ring seal
新的
Adapter C50C to 2 1/2 inch with O-ring sealAdapter for the Mobile Gas Flare XL for use in blow-out units that are difficult to access. Connections: 2 1/2" ET with O-ring on the inlet side, DN50 Camlock coupling on the outlet side DN50 gas hose with Camlock nipple can be connected directly. Max. pressure 16 bar
Regulating valve for test gas Ecomini 80 l/h
新的
Regulating valve for test gas Ecomini 80 l/hfor test gas cans 0.85 litre, 0.9 litre and 1.65 litre 35 bar / 70 bar Extraction regulator for direct connection to test gas cans. Gas flow limitation 80 l/h for targeted test gas supply. Attention: coupling with free passage!
Regulating valve for test gas Ecomini 120 l/h
新的
Regulating valve for test gas Ecomini 120 l/hfor test gas cans 0.85 litre, 0.9 litre and 1.65 litre 35 bar / 70 bar Extraction regulator for direct connection to test gas cans. Gas flow limitation 120 l/h for targeted test gas supply. Attention: coupling with free passage!
Panasonic Toughbook FZ-G2 MK 1, GPS
Panasonic Toughbook FZ-G2 MK 1, GPSFor use in the professional gas leak detection With its capacitive 10-finger multi-touch outdoor display this System ideally suited to optimize the work in the field. - Intel® Core i5-10310U vPro processor - 512 GB NVMe Opal SSD, 16 GB RAM - Highly luminous 10.1 "large WUXGA display (1920 x 1200) with up to 1000 cd / m2 - Capacitive 10-finger multi-touch screen and digitizer - Bluetooth® Version 5.1, dGPS (u-blox NEO-M8N), WLAN 802.11ax - 1x USB-A 3.0, 1x USB-C, 1x LAN - Front & Rear camera - Water and dust proof (IP65) * - Up to 10 hours of battery life (50 Wh) - Battery replaceable by user - Lightweight design - Weight 1.1 kg - Withstands drops from up to 180 cm height* - 3-year standard warranty - incl. mains plug & digitizer pen *manufacturer information
Control panel for Mobile Gas Flare S
Control panel for Mobile Gas Flare Sincluding pressure reducer (1bar), control manometer, couplings (S21 and S20) for concentration measurements and pressure measurements and ball valve, Kamlok Nippel inlet side and Kamlok coupling outlet side, max. inlet pressure 10 bar, outlet pressure limited to 1 bar for Mobile Gas Flare S
Gas inlet screw - with nipple series 20
Gas inlet screw - with nipple series 20for SIGI EX, SAFE EthanTest, GOLIATH, HUNTER, Laser HUNTER and HUNTER H2
Panasonic Toughbook FZ-G2 MK 1, LTE
Panasonic Toughbook FZ-G2 MK 1, LTEFor use in the professional gas leak detection With its capacitive 10-finger multi-touch outdoor display this system is ideally suited to optimize the work in the field. - Intel® Core i5-10310U vPro processor - 512 GB NVMe Opal SSD, 16 GB RAM - Highly luminous 10.1 "large WUXGA display (1920 x 1200) with up to 1000 cd / m2 - Capacitive 10-finger multi-touch screen and digitizer - Bluetooth® Version 5.1, 4G/LTE, WLAN 802.11ax - 1x USB-A 3.0, 1x USB-C, 1x LAN - Front & Rear camera - Water and dust proof (IP65) * - Up to 10 hours of battery life (50 Wh) - Battery replaceable by user - Lightweight design - Weight 1.1 kg - Withstands drops from up to 180 cm height* - 3-year standard warranty - incl. mains plug & digitizer pen *manufacturer information
Replacement barcode scanner for DruckTest memo BC
Replacement barcode scanner for DruckTest memo BCReplacement for defective scanner with spiral cable and angled connector
Basic amount for GasCam operation
Basic amount for GasCam operationBasic amount for GasCam operation - GasCam measurement at operating place - Recording videos / pictures for dokumentation of measurement results
Paper roll for thermal printer IR 58 mm
Paper roll for thermal printer IR 58 mmfor HMG, GasTest delta3 and SAFE EthanTest length approx. 10 m
Connecting cable MPP 30-30/70-35 - smart memo
Connecting cable MPP 30-30/70-35 - smart memoEnables communication between MPP 30-30/70-35 and the smart memo. Length: 5 m
Paper for roll for thermal printer IR 112 mm
Paper for roll for thermal printer IR 112 mmfor thermal printer GasTest delta, DruckTest memo/GT - length approx. 28 m - for about 80 prints of 300 mm length
Gas inlet screw - with nipple S 20 for OLLI
Gas inlet screw - with nipple S 20
for OLLIMaterial: plastic
Screw cap 1620 stainless steel for memo / GT
Screw cap 1620 stainless steel for memo / GT
Connecting accesory for ignition module for gas standpipe
Connecting accesory for ignition module for gas standpipeConnecting accesory for ignition module for gas standpipe including shut-off valve and 5 m propane hose
Comfort headphone for leak detector LS-01 - 8-pin plug -
Comfort headphone for leak detector LS-01 - 8-pin plug -- 8-pole triad connector version - Headphones with larger cone and extended listening comfort.
Ground stake, stainless steel
Ground stake, stainless steelwith bayonet coupling
Dust cap for coupling 2510
Dust cap for coupling 2510
Thermal printer IR 112 mm for GasTest delta/DruckTest GT
Thermal printer IR 112 mm for GasTest delta/DruckTest GT- paper width: 112 mm - powered by rechargeable battery - infrared interface for data transmission - battery charger for GasTest delta can be used - dimensions: 170 x 160 x 67 mm
Weather protective umbrella
Weather protective umbrellaWeather protective umbrella dense & heavy construction
每页条目
1 - 20 / 97
keyboard_arrow_up